Top 10 Best Plumbers in Colorado Springs, CO

What counts as a plumbing emergency?

A plumbing emergency includes burst pipes, overflowing toilets, major leaks, sewer backups, or any issue causing flooding or immediate water damage. If it can’t wait, treat it as an emergency.

How fast can an emergency plumber get to my home?

Many emergency plumbers offer 24/7 service and aim to arrive within an hour, though response time depends on your location and current demand.

What should I do while waiting for the plumber to arrive?

• Turn off the main water valve to stop flooding.
• Shut off the water heater if the leak affects hot water lines.
• Move furniture and valuables away from the affected area.
• Use buckets or towels to contain minor leaks if safe to do so.

Are emergency plumbing repairs more expensive?

Yes—emergency calls often include after-hours or immediate-response fees. However, quick repairs can prevent far greater costs from water or structural damage.

Can I fix a plumbing emergency myself?

For small issues you might apply temporary fixes, but serious problems like burst pipes or sewage backups should be handled by a licensed professional to avoid larger, costly damage.

What are the common signs of a hidden water leak?

• Unusually high water bills without increased usage.
• Damp spots, mold growth, or musty odors on walls or floors.
• Hearing running water when no faucets are on.
• Low water pressure in certain fixtures.

How do plumbers detect hidden leaks?

Professional plumbers use advanced tools like electronic leak detectors, thermal imaging cameras, and acoustic sensors to locate leaks without tearing into walls or floors.

Can small leaks cause major damage?

Yes, even a tiny drip can lead to structural damage, mold growth, and higher utility bills if ignored. Detecting and fixing leaks early can save you thousands in repairs.

How much does leak detection and repair cost?

Costs vary depending on the leak’s location and severity. Simple fixes might cost under $200, while complex or underground leaks can run several hundred dollars more.

Can I find and fix a leak myself?

You can try locating obvious leaks under sinks or around toilets, but hidden leaks often require professional detection tools and repair to prevent long-term damage.

When should I consider replacing my pipes?

You should consider pipe replacement if you notice frequent leaks, discolored water, low water pressure, or if your plumbing system is over 30–50 years old. Aging materials like galvanized steel or lead should be replaced immediately.

What types of pipes are best for home plumbing?

• PEX: Flexible, affordable, and great for most modern homes.
• Copper: Durable and long-lasting, but more expensive.
• PVC/CPVC: Common for drain and vent lines, resistant to corrosion.

How long does pipe installation or replacement take?

Small projects may take a few hours, while full-home repiping can take several days depending on the size of your house and the complexity of the plumbing layout.

Do I need to replace all my pipes at once?

Not necessarily. If only certain sections are corroded or leaking, you can replace those areas. However, older systems made of outdated materials may benefit from a complete repipe for reliability and safety.

How can I prepare my home for pipe replacement?

• Clear access to plumbing areas like under sinks or in basements.
• Cover furniture or valuables to protect them from dust or debris.
• Plan for limited water use during the installation period.

What are the common signs that my drain needs cleaning?

Slow draining water, gurgling noises, foul odors, or frequent clogs are signs your drains need cleaning. Ignoring them can lead to bigger plumbing issues later.

How often should I schedule professional drain cleaning?

For most homes, scheduling a professional drain cleaning once a year helps prevent buildup, blockages, and pipe damage. Older homes or heavy-use drains may need it more often.

What causes drains to clog most often?

• Grease and oil buildup in kitchen sinks
• Hair and soap scum in bathroom drains
• Food particles, coffee grounds, and starches
• Foreign objects or mineral buildup in pipes

Can I use chemical drain cleaners to unclog a drain?

It’s not recommended. Chemical cleaners can corrode pipes and cause long-term damage. It’s safer to use a plunger, drain snake, or call a professional plumber.

What are the benefits of professional drain cleaning?

Professional drain cleaning removes stubborn buildup, improves water flow, eliminates odors, and prevents future clogs—keeping your plumbing system running smoothly.

What is a sewer line inspection?

A sewer line inspection uses a specialized camera to check the inside of your pipes for blockages, cracks, or root intrusion. It helps identify issues before they become major repairs.

When should I schedule a sewer line inspection?

You should schedule an inspection if you notice slow drains, foul odors, gurgling sounds, or frequent backups. It’s also smart to get one before buying a new home.

How is a sewer line repair done?

• Traditional repair: Involves digging to access and replace damaged pipes.
• Trenchless repair: Uses advanced methods like pipe bursting or relining to fix the line without major digging.

How long does a sewer line repair take?

The time depends on the problem’s severity and the repair method used. Minor trenchless repairs may take a few hours, while full replacements can take one to two days.

How can I prevent future sewer line problems?

• Avoid flushing wipes, grease, or large food particles down drains.
• Have your lines professionally cleaned every 1–2 years.
• Trim nearby trees to prevent root intrusion.

What’s the difference between tank and tankless water heaters?

A traditional tank water heater stores and heats a large amount of water for later use, while a tankless water heater heats water on demand—providing endless hot water and better energy efficiency.

How long does a water heater installation take?

Most standard water heater installations take about 2 to 4 hours. Tankless systems may take longer, especially if additional plumbing or venting adjustments are needed.

When should I replace my water heater instead of repairing it?

If your unit is over 10 years old, leaking, or not heating efficiently, replacement is usually the smarter long-term choice—especially for older tank-style heaters.

How do I know if my water heater needs repair?

• Water takes too long to heat up or runs out quickly.
• Unusual noises, popping, or rumbling from the tank.
• Rusty or discolored water coming from the tap.
• Leaks or moisture around the base of the unit.

Are tankless water heaters worth the cost?

Yes, for many homes. Though they cost more upfront, tankless units are energy-efficient, take up less space, and can last up to 20 years—often double the lifespan of traditional models.

What are common signs that my toilet needs repair?

Common signs include constant running water, weak flushing, water leaks around the base, or unusual noises after flushing. These issues can waste water and increase your utility bills if left unchecked.

Can I install a new toilet myself?

If you have plumbing experience, you can try, but most homeowners prefer a professional plumber to ensure proper sealing, leveling, and drainage. A bad installation can cause leaks or long-term damage.

How long does a toilet installation take?

A standard toilet installation typically takes about 1–2 hours for a professional plumber, depending on the plumbing setup and any necessary repairs to the flange or pipes.

What causes a toilet to keep running after flushing?

• Worn-out flapper or fill valve.
• Improper water level in the tank.
• Leaking flush valve seal.
• Mineral buildup inside the tank parts.

How often should a toilet be replaced?

Most toilets last around 15–20 years. If you’re dealing with frequent clogs, cracks, or leaks—or just want better water efficiency—it may be time for a replacement.

When should I replace my faucet or fixture?

You should consider replacing your faucet or fixture if it’s leaking, corroded, constantly dripping, has low water pressure, or looks outdated and no longer matches your bathroom or kitchen style.

Can I replace a faucet or fixture myself?

Simple replacements can be DIY projects if you’re comfortable with plumbing tools, but for older systems or hard-to-reach connections, hiring a licensed plumber is safer and more reliable.

How long does it take to replace a faucet or fixture?

Most faucet or fixture replacements take between 30 minutes to 2 hours, depending on the type, accessibility, and whether any old hardware or plumbing needs to be repaired.

What types of fixtures can plumbers replace?

• Bathroom and kitchen faucets
• Showers and tubs
• Outdoor hose bibs
• Utility and laundry sinks
• Water supply lines and shut-off valves

How can I choose the right faucet or fixture?

Consider the fixture’s style, finish, and functionality. Choose high-quality brands with solid warranties, and make sure the fixture matches your sink or plumbing configuration before purchase.

What are the signs that my garbage disposal needs repair?

Common signs include loud grinding noises, frequent jams, leaks under the sink, unpleasant odors, or the unit not turning on at all. If you notice any of these, it’s time for a repair or replacement.

Can I install a new garbage disposal myself?

If you’re handy with plumbing and electrical work, you might install it yourself. However, hiring a professional ensures the disposal is installed safely and meets local plumbing codes.

How long does a garbage disposal usually last?

Most garbage disposals last between 8 to 12 years, depending on the brand, usage, and maintenance. Regular cleaning and avoiding hard or fibrous foods can extend its lifespan.

What foods should I avoid putting in the garbage disposal?

• Grease, oil, and fat
• Fibrous foods like celery or corn husks
• Hard items like bones or fruit pits
• Starchy foods such as pasta, rice, and potato peels
• Coffee grounds and eggshells

How can I maintain my garbage disposal to prevent problems?

• Run cold water before and after each use.
• Grind small amounts of food at a time.
• Clean the unit monthly using ice cubes and citrus peels.
• Avoid harsh chemicals that can damage the blades or seals.

What’s included in a shower and bathtub installation service?

A standard installation includes removing the old unit (if any), preparing plumbing connections, installing the new shower or tub, sealing joints, and testing for leaks and proper drainage.

How long does it take to install a new shower or bathtub?

Most professional installations take between one and three days, depending on the complexity, plumbing setup, and whether tile or wall repairs are needed.

Do I need to provide the bathtub or shower unit?

Yes, most plumbers or contractors ask homeowners to choose and purchase their preferred unit. They’ll handle the installation and provide any additional fittings or materials needed.

Can I replace my bathtub with a walk-in shower?

Absolutely! Many homeowners upgrade to walk-in showers for accessibility and modern style. Your plumber will assess the existing plumbing and space to ensure compatibility before installation.

How do I prepare for the installation?

• Clear the bathroom area of personal items and accessories.
• Ensure there’s an accessible path for moving large fixtures.
• Confirm water supply and drain lines are in working order.
• Discuss layout and design details with your installer in advance.

What is the difference between a water softener and a filtration system?

A water softener removes minerals like calcium and magnesium that cause hard water, while a filtration system removes impurities, chlorine, sediment, and contaminants for cleaner, better-tasting water.

Do I really need a water softener or filtration system?

If you have hard water stains, soap scum, or appliances wearing out faster, a softener can help. A filtration system is ideal if your tap water tastes bad, smells odd, or you want to reduce chemicals and impurities.

How long does it take to install a water softener or filtration system?

Most installations take between 2–4 hours, depending on your plumbing setup and the type of system being installed.

How often do I need to maintain my system?

• Water softener: Refill salt as needed, typically every 4–6 weeks.
• Filtration system: Replace filters every 6–12 months, depending on usage and water quality.
• Schedule a yearly inspection to ensure everything runs efficiently.

Can I install a water softener or filtration system myself?

Some DIY systems exist, but professional installation ensures proper plumbing connections, optimal water flow, and warranty protection. It’s usually best to have a licensed plumber handle the job.

What are the signs of a gas line leak?

• A strong smell of sulfur or rotten eggs.
• Hissing sounds near gas lines or appliances.
• Dead or dying plants around buried gas pipes.
• Unexplained dizziness, nausea, or headaches indoors.

What should I do if I suspect a gas leak?

• Evacuate the area immediately—don’t use phones, switches, or anything electrical.
• Leave doors open to let gas escape.
• Call your gas company or 911 from a safe location.
• Do not re-enter until professionals declare it safe.

Can I install or repair a gas line myself?

No. Gas line work should only be done by a licensed professional. DIY gas repairs are extremely dangerous and can lead to leaks, explosions, or carbon monoxide poisoning.

How long does a gas line repair or installation take?

Most minor gas line repairs can be completed within a few hours. Full installations, especially for new appliances or outdoor lines, may take one to two days depending on complexity and permits.

How often should gas lines be inspected?

It’s recommended to have your gas lines inspected every 1–2 years by a licensed plumber or gas technician to ensure safety and prevent leaks or corrosion.

What is a slab leak?

A slab leak happens when water or sewer lines beneath your home’s concrete foundation start leaking. These leaks can cause foundation damage, high water bills, or even mold growth if not fixed quickly.

How can I tell if I have a slab leak?

• Unusually high water bills with no clear reason.
• Warm spots on floors or damp carpets.
• Low water pressure throughout the house.
• Sounds of running water when all taps are off.
• Cracks appearing in walls or flooring.

How do professionals detect a slab leak?

Plumbers use specialized tools such as electronic leak detection equipment, thermal imaging cameras, and acoustic listening devices to locate leaks without breaking the slab unnecessarily.

Can a slab leak be repaired without breaking the concrete?

Yes, in some cases. Depending on the location and severity, plumbers may reroute new pipes above the slab or use trenchless repair methods to minimize damage and reduce repair time.

How much does slab leak repair cost?

The cost varies based on leak location, accessibility, and repair method. Early detection usually means lower costs, while ignored leaks can lead to major foundation or structural repairs.

What is backflow and why does it matter?

Backflow is the unwanted reversal of water flow that can allow contaminants to enter your clean water supply. It matters because it poses health risks and can contaminate a building’s potable water.

What is backflow testing?

Backflow testing is a professional inspection of backflow prevention devices to ensure they work correctly. The tester checks valves and reports any issues so the device can be repaired or replaced if needed.

How often should backflow devices be tested?

Testing frequency varies by local regulations, but most jurisdictions require annual testing. Check with your local water authority or building code for exact requirements.

What happens during a backflow test?

• The certified tester isolates the device.
• Pressure and valve operation are measured using test gauges.
• Results are recorded and submitted to the local water authority if required.
• If the device fails, the tester will recommend repair or replacement.

How can I prevent backflow in my property?

• Install the correct backflow prevention device for your system.
• Schedule regular testing and maintenance with a certified tester.
• Avoid cross-connections between potable water and possible contaminants.
• Follow local codes and keep records of tests and repairs.

What is a sump pump and why do I need one?

A sump pump removes water that collects in your basement or crawl space, helping prevent flooding, mold growth, and foundation damage. It’s especially important if your home is in a low-lying or flood-prone area.

How often should a sump pump be serviced?

It’s best to inspect and test your sump pump every 3 to 4 months, and schedule professional maintenance at least once a year to ensure it’s working properly when you need it most.

What are the signs that my sump pump needs repair or replacement?

• Unusual noises or vibrations during operation.
• Frequent cycling on and off, even without water.
• Visible rust, clogs, or foul odors.
• The pump fails to turn on or drain water effectively.

Can I install a sump pump myself?

While DIY installation is possible, it’s best to hire a licensed plumber to ensure correct pit placement, proper discharge line setup, and reliable waterproofing. A professional install also helps maintain your warranty.

What maintenance steps can I do myself?

• Check the power source and make sure the pump is plugged in.
• Test the pump by pouring water into the sump pit to trigger activation.
• Clean debris from the pit and discharge line.
• Inspect the float switch to make sure it moves freely.

What is hydro jetting?

Hydro jetting is a professional drain-cleaning method that uses high-pressure water streams to remove grease, scale, roots, and buildup from pipes, restoring full water flow.

When should I consider hydro jetting services?

You should consider hydro jetting if you have:

• Recurring or stubborn drain clogs
• Slow-moving drains throughout your home
• Foul odors coming from pipes
• Backups in multiple fixtures

Is hydro jetting safe for all types of pipes?

Hydro jetting is safe for most modern plumbing systems made of PVC, copper, or cast iron. However, very old or damaged pipes should be inspected first to avoid further damage.

How does hydro jetting compare to traditional drain cleaning?

Unlike snaking, which only clears a path through a clog, hydro jetting thoroughly cleans the entire pipe interior, preventing future blockages and improving flow long-term.

How often should I schedule hydro jetting service?

For residential homes, scheduling hydro jetting once every 1–2 years helps maintain clean, efficient plumbing. Businesses or restaurants with heavy grease use may need it more frequently.

What plumbing work is involved in a bathroom or kitchen remodel?

Remodeling often includes replacing old pipes, relocating sinks or appliances, installing new fixtures, and ensuring proper drainage and water pressure throughout the space.

Do I need a licensed plumber for remodeling projects?

Yes, always hire a licensed plumber. They ensure your remodel meets local building codes, passes inspections, and avoids costly leaks or damage later on.

Can I move my sink, shower, or dishwasher to a new location?

Usually, yes—but it depends on your existing plumbing layout. Moving fixtures often requires rerouting pipes and drains, which should be done by a professional plumber.

How long does plumbing take during a kitchen or bathroom remodel?

Plumbing work can take anywhere from a few days to a couple of weeks, depending on the project size, layout changes, and the condition of your existing pipes.

What should I do before starting a remodeling plumbing project?

• Plan your layout and choose fixtures early.
• Check local permit requirements.
• Hire a licensed plumber to inspect your current system.
• Set a realistic budget that includes potential pipe upgrades.